No. | Description | Notes | Part No. |
|
| Standard rubber cone - front & rear | | | |
1 | Competition rubber cone - front & rear | | | |
1 | Moulton Smootha Ride front cone | | | |
1 | Moulton Smootha Ride rear cone | | | |
| Aluminium front strut, each | | |
Out of stock |
2 | Adjusta Ride front struts, pair | | | |
| Adjusta Ride full car kit | | | |
| Knuckle joint - standard, each | | | |
3 | Knuckle joint - Adjusta Ride, each | | | |
| Knuckle joint nylon cup, each | | | |
| Genuine tie rod (inc bushes), | each | | |
5 | Adjustable tie rods - thick, pair | | | |
5 | Group 'A' Adjustable tie rods, pair suitable for road, rally or race | | | |
5 | Group 'A' rose jointed tie rods, pair suitable for tarmac rally or race | | | |
| Female Rose Joint 1/2" UNF, each | | | |
| Teflon 1/2"UNF female rose joint | | | |
| Male Rose Joint 1/2" UNF, each | | | |
| Teflon 1/2"UNF male rose joint | | |
| Bolt - tie rod to bottom arm, | each | | |
| Spring Washer - 5/16" UNF Spring washer, | each | | |
| Nut - Nyloc 5/16'UNF | each | | |
| Standard rubber bushes | each | | |
9 | Uprated rubber bushes | set 4 | | |
9 | Poly bush kit (black or red) | set 4 | | |
| Washer - cup type, tie rod end | each | | |
| Washer - flat, tie rod end | each | | |
| Nyloc nut - 7/16"UNF tie rod | each | | |
| Shock Absorbers | each or kits | | |
| Rubber eyelet bush (with insert), | each | | |
| Top standard mount, LH, | each | | |
14 | Top standard mount, RH, | each | | |
14 | Top competition mount, RH, | each | | |
14 | Top competition mount, LH, | each | | |
| Set Screw - 1/4" UNF x 3/4" | each | | |
| Spring Washer - 1/4" | each | | |
| Front Shock Absorber Bottom Mount, | each | | |
17 | Lower competition pin | each | | |
| Nut - Nyloc 3/8"UNF shocker mount | each | | |
| Bump Stop - rubber twin bolt | each | | |
19 | Bump Stop - rubber single bolt | each | | |
19 | Bump Stop - rubber hydrolastic type | each | | |
19 | Bump Stop - rubber single bolt - early MK1 | each | | |
19 | Bump Stop - poly single bolt | pair | | |
19 | Bump Stop - poly twin bolt | pair | | |
| Nut - 1/4" UNF | | | |
20 | Nut - nyloc 1/4"UNF | | | |
| Spring Washer - 1/4" | | | |
21 | Washer - flat 1/4Ó | | | |
| Repair kit, all parts to service 1 x top arm | | | |
| Top arm shaft | each | | |
| Sealing Ring bush - top arm shaft | each | | |
| Thrust washer - top arm shaft | each | | |
| Thrust collar - top arm shaft | each | | |
| Retaining plate - top arm shaft | each | | |
| Spring washer - top arm shaft | each | | |
| Nut - top arm shaft | each | | |
| Rebound buffer, each | | | |
30 | Poly rebound buffer, pair | | | |
| Shaft - lower suspension arm | each | | |
| Bush - rubber (2 per arm) | each | | |
32 | Bush kit - polyurethane uprated (black or red) | kit | | |
32 | Bush set - nylon competition type | set | | |
| Nut - nyloc 3/8"UNF | each | | |
| Top Arm RH - suit dry suspension | | | |